Product Stain Information
ECL 100 ACRYLIC FENCE STAIN
PRODUCT DESCRIPTION & USES
ECL 100 Acrylic Fence Stain is a water based stain based on an acrylic modified co-polymer emulsion and permanent oxide colours. The product contains fungicides for timber protection and is ideal to be used on the rough sawn timber typically used on timber fences. ECL100 Acrylic Fence Stain exhibits good flow properties for ease of application combined with excellent coverage, quick drying and good durability.PRODUCT FEATURES
Easy application. Low odour. Excellent coverage. Quick drying under normal atmospheric conditions. Inhibits mould and mildew. Made in New Zealand for New Zealand conditions.SUBSTRATE PREPARATION INSTRUCTIONS
The surface should be clean, dry and free from oil, grease and other contaminants. ECL100 Acrylic Fence Stain is designed for unpainted surfaces only. Not suitable for fences made from materials other than fencing grade timber.RECOMMENDED APPLICATION METHODS AND TECHNIQUES
Mix the contents in the can thoroughly before and during use. Apply in full, even coats. Thin, if required for ease of application in hot or windy conditions or on very porous substrates, with up to 5% water.TECHNICAL DATA
- Wash Up : Water
- Colours : Redwood, Fern, Pine Green, Green, Mahogany, Black, Dark Brown and Grey.
- Pack Size : 10L
- Storage Temperature : 5 C - 50 C
- Shelf Life : Minimum 2 years.
- Toxicity : Non hazardous waterborne paint formulated without added lead or mercury.
- Designed to penetrate the timber to enhance the grain.
- Coverage : Up to 8 m2/L for rough sawn timber.
- For use on : Exterior timber finishes, Decking, weatherboards, fencing, outdoor furniture and trellis.
Stain Colours
-
Mahogany
Mahogany has a dark reddish brown tint
-
Redwood
A chestnut red colour stain
-
Green
A classic primary green
-
Pine Green
Pine has a mossy-green colour
-
Fern
Fern is similar to a chocolate brown colour
-
Dark Brown
A classic dark brown stain
-
Grey
A stunning dark grey stain
-
Black
Classic Black Stain